N32B DIY KIT | Essentials

N32B DIY kit of essential parts

What’s in the box:

• 1x N32B main board
• 32x 10k potentiometers
• 1x Arduino pro micro
• 2x 16 channel multiplexer
• 1x 7-segment display with 2 digits
• 1x MAX7219 IC
• 2x 12mm tactile switch buttons
• 2x TRRS 3.5 mm jack
• 1x 100NF capacitor
• 1x 10uF capacitor
• 4x 220 ohm resistors
• 1x 10K ohm resistors
• 1x 4.7K ohm resistor
• 1x Diode
• Screws, nuts and spacers will be added if you add a top panel to the kit.

*Please note, this kit does not include an enclosure, top panel and knob caps.

Specs

Hardware

• Arduino Pro Micro
• 32 potentiometers.
• 2 buttons for channel/preset change.
• Two-digit 7 segment display.

Midi Messages

• Control change messages:
  • With channel specific
• NRPN messages
• Accepts program change messages
• High resolution (1023 steps)
• Each knob is fully customizable with our N32B editor

Compatibility

Mac, Windows.

I/O

• Midi-USB connector via micro usb.
• Midi I/O – TRS 3.5mm (1/8″).
  A TRS to MIDI DIN adapters are available as well for hardware connectivity.

Channels

16 channels. Also supports custom channel assignment for each knob.

Presets

3 programmable presets, each knob is fully customizable with our N32B editor software.