N32B DIY kit of essential parts with wooden case, 2x TRS to MIDI DIN adapters, knobs and micro USB cable
What’s in the box:
N32B Essentials:
- 1x N32B main board
- 1x N32B top panel – Matte black
- 32x 10k potentiometers
- 1x Arduino pro micro
- 2x 16 channel multiplexer
- 1x 7-segment display with 2 digits
- 1x MAX7219 IC
- 2x 12mm tactile switch buttons
- 2x TRRS 3.5 mm jack
- 1x 100NF capacitor
- 1x 10uF capacitor
- 4x 220 ohm resistors
- 1x 10K ohm resistors
- 1x 4.7K ohm resistor
- 1x Diode
- 2x M3 16mm screws
- 6x M3 6mm screws
- 4x M3 20mm screws
- 6x 8mm spacers
N32B Wooden case:
- 4x Rubber legs
- 1x MDF case parts
- 1x Sanding paper
- 1x Glue
Connectivity
- 1x Micro USB cable (1m)
- 2x TRS to MIDI DIN adapters
Dressing
- 32x Black knobs
Specs
Hardware
- Arduino Pro Micro
- 32 potentiometers.
- 2 buttons for channel/preset change.
- Two-digit 7 segment display.
Midi Messages
- Control change messages:
- With channel specific
- NRPN messages
- Accepts program change messages
- High resolution (1023 steps)
- Each knob is fully customizable with our N32B editor
Compatibility
Mac, Windows.I/O
- Midi-USB connector via micro usb.
- Midi I/O – TRS 3.5mm (1/8″).
Channels
16 channels. Also supports custom channel assignment for each knob.Presets
5 programmable presets, each knob is fully customizable with our N32B editor software.You can compare our different bundles in our N32B kits comparison page.
Open Source Hardware Association
